All, Successfully installed FreeBSD 5.3-BETA6 on Dell PE2860. After rebooting in the login prompt the system doesn't accept any keystrokes. I have 1 USB and 1 PS/2 Keyboard. Both keyboards are working (caps on/off, Numlock on/off works), but the characters doesn't comes to the system console. Attaching the dmesg output. Looks like DELL DRAC (Dell Remote Access Card) card is identified as Keyboard. See the line: (ukbd0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1) Any fixes? ------------------------------------------------------------------------ ------------------------- Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA6 #0: Sat Sep 25 19:41:14 UTC 2004 root_at_wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3391.52-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073479680 (1023 MB) avail memory = 1040932864 (992 MB) ACPI APIC Table: <DELL PE BKC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic1: WARNING: intbase 32 != expected base 24 ioapic2: Changing APIC ID to 10 ioapic2: WARNING: intbase 64 != expected base 56 ioapic3: Changing APIC ID to 11 ioapic3: WARNING: intbase 96 != expected base 88 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard ioapic2 <Version 2.0> irqs 64-87 on motherboard ioapic3 <Version 2.0> irqs 96-119 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL PE BKC> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 amr0: <LSILogic MegaRAID> mem 0xdfdc0000-0xdfdfffff,0xd80f0000-0xd80fffff irq 46 at device 14.0 on pci2 amr0: [GIANT-LOCKED] amr0: <LSILogic PERC 4e/Di> Firmware 513O, BIOS H418, 256MB RAM pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5 pci6: <ACPI PCI bus> on pcib6 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xecc0-0xecff mem 0xdfae0000-0xdfafffff irq 64 at device 7.0 on pci6 em0: Ethernet address: 00:11:43:30:cc:1e em0: Speed:N/A Duplex:N/A pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5 pci7: <ACPI PCI bus> on pcib7 em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0xdcc0-0xdcff mem 0xdf8e0000-0xdf8fffff irq 65 at device 8.0 on pci7 em1: Ethernet address: 00:11:43:30:cc:1f em1: Speed:N/A Duplex:N/A pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8 pci9: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 0.2 on pci8 pci10: <ACPI PCI bus> on pcib10 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ukbd0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1 kbd1 at ukbd0 ums0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1 ums0: X report 0x0002 not supported device_attach: ums0 attach returned 6 uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2 uhub2: 2 ports with 2 removable, self powered ukbd1: CHICONY USB Keyboard, rev 1.10/1.03, addr 3, iclass 3/1 kbd2 at ukbd1 ums0: CHICONY USB Keyboard, rev 1.10/1.03, addr 3, iclass 3/1 ums0: 3 buttons and Z dir. uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib11 pci11: <unknown> at device 5.0 (no driver attached) pci11: <unknown> at device 5.1 (no driver attached) pci11: <unknown> at device 5.2 (no driver attached) atapci0: <SiI 0680 UDMA133 controller> port 0xcc70-0xcc7f,0xccd0-0xccd3,0xccd8-0xccdf,0xcce4-0xcce7,0xccf0-0xccf7 irq 23 at device 6.0 on pci11 ata2: channel #0 on atapci0 ata3: channel #1 on atapci0 pci11: <display, VGA> at device 13.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci1 ata1: channel #1 on atapci1 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xd2800-0xd37ff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec ATAPI_RESET time = 20us acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master UDMA33 ATAPI_RESET time = 540us ATAPI_RESET time = 570us ata2-master: FAILURE - SETFEATURES SET TRANSFER MODE status=41<READY,ERROR> error=4<ABORTED> ata2-slave: FAILURE - SETFEATURES SET TRANSFER MODE status=41<READY,ERROR> error=4<ABORTED> acd1: CDROM <VIRTUALCDROM DRIVE/> at ata2-slave BIOSPIO amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 34680MB (71024640 sectors) RAID 1 (optimal) amrd1: <LSILogic MegaRAID logical drive> on amr0 amrd1: 104040MB (213073920 sectors) RAID 5 (optimal) ses0 at amr0 bus 0 target 6 lun 0 ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device ses1 at amr0 bus 1 target 6 lun 0 ses1: <PE/PV 1x4 SCSI BP 1.0> Fixed Processor SCSI-2 device ses1: SAF-TE Compliant Device SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! Mounting root from ufs:/dev/amrd0s1a ----------------------------------------------- --T. Muthu MohanReceived on Wed Sep 29 2004 - 11:44:47 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:14 UTC