hi, I have a problem using usb mouse under T42p. If usb mouse is plug-in when booting, system will panic. After boot, this problem will not occur. my system config is: machine i386 cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GENERIC # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options SCHED_ULE # ULE scheduler options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directoriesoptions MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS)options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. # Debugging for use in -current options KDB # Enable kernel debugger support. options DDB # Support DDB. options GDB # Support remote GDB. #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # To make an SMP kernel, the next two lines are needed #options SMP # Symmetric MultiProcessor Kernel #device apic # I/O APIC # Bus support. Do not remove isa, even if you have no isa slots device isa device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device ahd # AHA39320/29320 and onboard AIC79xx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters device adv # Advansys SCSI adapters device adw # Advansys wide SCSI adapters device aha # Adaptec 154x SCSI adapters device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. device bt # Buslogic/Mylex MultiMaster SCSI adapters device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem device amr # AMI MegaRAID device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device ciss # Compaq Smart RAID 5* device dpt # DPT Smartcache III, IV - See NOTES for optionsdevice hptmv # Highpoint RocketRAID 182x device iir # Intel Integrated RAID device ips # IBM (Adaptec) ServeRAID device mly # Mylex AcceleRAID/eXtremeRAID device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers device aac # Adaptec FSA RAID device aacp # SCSI passthrough for aac (requires CAM) device ida # Compaq Smart RAID device mlx # Mylex DAC960 family device pst # Promise Supertrak SX6000 device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card device ixgb # Intel PRO/10GbE Ethernet Card device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device lge # Level 1 LXT1001 gigabit Ethernet device nge # NatSemi DP83820 gigabit Ethernet device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vge # VIA VT612x gigabit Ethernet device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards device ex # Intel EtherExpress Pro/10 and Pro/10+ device ep # Etherlink III based cards device fe # Fujitsu MB8696x based cards device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. device lnc # NE2100, NE32-VL Lance Ethernet cards device sn # SMC's 9000 series of Ethernet chips device xe # Xircom pccard Ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards device wlan # 802.11 support device an # Aironet 4500/4800 802.11 wireless NICs. device awi # BayStack 660 and others device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device mem # Memory and kernel memory devices device io # I/O device device random # Entropy device device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) #my config device sound device snd_ich device smbus device smb device ichsmb device ehci device uplcom device atapicam device pf device pflog device pfsync options CPU_ENABLE_SSE and backtrace: [GDB will not be able to debug user-mode threads: /usr/lib/libthread_db.so: Undefined symbol "ps_pglobal_lookup"] GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-marcel-freebsd". doadump () at pcpu.h:159 (kgdb) bt #0 doadump () at pcpu.h:159 #1 0xc048b7d6 in db_fncall (dummy1=0, dummy2=0, dummy3=-1065397721, dummy4=0xf8a808c4 "\uffff\b\uffff\uffff\uffff4\177\u5121\b\uffff\uffff\uffff\b\uffff\uffff\220\a") at /usr/src/sys/ddb/db_command.c:531 #2 0xc048b5e4 in db_command (last_cmdp=0xc09135e4, cmd_table=0x0, aux_cmd_tablep=0xc0890664, aux_cmd_tablep_end=0xc0890680) at /usr/src/sys/ddb/db_command.c:349 #3 0xc048b6ac in db_command_loop () at /usr/src/sys/ddb/db_command.c:455 #4 0xc048d241 in db_trap (type=12, code=0) at /usr/src/sys/ddb/db_main.c:221 #5 0xc066af77 in kdb_trap (type=12, code=0, tf=0xf8a80a58) at /usr/src/sys/kern/subr_kdb.c:421 #6 0xc080bc09 in trap_fatal (frame=0xf8a80a58, eva=33489795) at /usr/src/sys/i386/i386/trap.c:801 #7 0xc080b98f in trap_pfault (frame=0xf8a80a58, usermode=0, eva=33489795) at /usr/src/sys/i386/i386/trap.c:724 #8 0xc080b58d in trap (frame= {tf_fs = 24, tf_es = -1056702448, tf_ds = 16, tf_edi = -123204472, tf_esi = 4, tf_ebp = -123204964, tf_isp = -123204988, tf_ebx = -1014770688, tf_edx = 33489407, tf_ecx = 0, tf_eax = -1064551756, tf_trapno = 12, tf_err = 2, tf_eip = -1067513210, tf_cs = 8, tf_eflags = 66054, tf_esp = 0, tf_ss = -123204556}) at /usr/src/sys/i386/i386/trap.c:414 #9 0xc07fdcba in calltrap () at /usr/src/sys/i386/i386/exception.s:139 #10 0x00000018 in ?? () #11 0xc1040010 in ?? () #12 0x00000010 in ?? () #13 0xf8a80c88 in ?? () #14 0x00000004 in ?? () #15 0xf8a80a9c in ?? () #16 0xf8a80a84 in ?? () #17 0xc383d400 in ?? () #18 0x01ff01ff in ?? () #19 0x00000000 in ?? () #20 0xc08c3ab4 in usb_cdevsw () #21 0x0000000c in ?? () #22 0x00000002 in ?? () #23 0xc05f0a86 in usb_get_next_event (ue=0xf8a80aa8) at /usr/src/sys/dev/usb/usb.c:771 #24 0xc05f067c in usbread (dev=0xc35bc300, uio=0xf8a80c88, flag=4) at /usr/src/sys/dev/usb/usb.c:528 #25 0xc0608a0f in devfs_read_f (fp=0xc38876c0, uio=0xf8a80c88, cred=0xc347ad80, flags=0, td=0xc3883cf0) at /usr/src/sys/fs/devfs/devfs_vnops.c:931 #26 0xc0673309 in dofileread (td=0xc3883cf0, fp=0xc38876c0, fd=7, buf=0x0, nbyte=384, offset=Unhandled dwarf expression opcode 0x93 ) at file.h:234 #27 0xc06731bb in read (td=0xc3883cf0, uap=0xf8a80d14) at /usr/src/sys/kern/sys_generic.c:107 #28 0xc080bf17 in syscall (frame= {tf_fs = 47, tf_es = 47, tf_ds = 47, tf_edi = -1077941812, tf_esi = 1, tf_ebp = -1077941032, tf_isp = -123204236, tf_ebx = 16, tf_edx = 3, tf_ecx = 0, tf_eax = 3, tf_trapno = 12, tf_err = 2, tf_eip = 671885715, tf_cs = 31, tf_eflags = 582, tf_esp = -1077941860, tf_ss = 47}) at /usr/src/sys/i386/i386/trap.c:951 #29 0xc07fdd0f in Xint0x80_syscall () at /usr/src/sys/i386/i386/exception.s:200 ---Type <return> to continue, or q <return> to quit--- #30 0x0000002f in ?? () #31 0x0000002f in ?? () #32 0x0000002f in ?? () #33 0xbfbfe9cc in ?? () #34 0x00000001 in ?? () #35 0xbfbfecd8 in ?? () #36 0xf8a80d74 in ?? () #37 0x00000010 in ?? () #38 0x00000003 in ?? () #39 0x00000000 in ?? () #40 0x00000003 in ?? () #41 0x0000000c in ?? () #42 0x00000002 in ?? () #43 0x280c2993 in ?? () #44 0x0000001f in ?? () #45 0x00000246 in ?? () #46 0xbfbfe99c in ?? () #47 0x0000002f in ?? () #48 0x00000000 in ?? () #49 0x00000000 in ?? () #50 0x00000000 in ?? () #51 0x00000000 in ?? () #52 0x7d7ea000 in ?? () #53 0xc38823f8 in ?? () #54 0xc3883cf0 in ?? () #55 0xf8a80600 in ?? () #56 0xf8a805e8 in ?? () #57 0xc3481cf0 in ?? () #58 0xc066395b in sched_switch (td=0x1, newtd=0x10, flags=Cannot access memory at address 0xbfbfece8 ) at /usr/src/sys/kern/sched_4bsd.c:963 Previous frame inner to this frame (corrupt stack?) (kgdb)Received on Fri Feb 11 2005 - 00:53:33 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:28 UTC