Hi. I have sent this e-mail to the hardware and usb lists without any result. Please, can you help me? First, i will apologize about my bad english... sorry... I'm trying to install FreeBSD 6.0-Release into a Dell Precision 380 workstation. The machine has an usb keyboard. I try with the "usb keyboard" from menu boot, also setting this "set hint.atkbd.0.flags="0x1"" from "options" in the menu boot option, or also with "set hint.acpi.0.disabled="1""... Is impossible to obtain keyboard when i arrive to sysinstall menu. Sometimes the machine hangup when arrive to "atkb" or keyboard section in the kernel load. Really, I can't understand what's happen... If a try with a FreeBSD 5.3 (Freesbie 1.1 livecd) all run ok. Here, attached to this mail, are two dmesg archives; one extracted from a knoppix 4.0 and another extrated from a Freesbie 1.1, and also two more archives from a lspci -vv from the knoppix 4.0, and the another from the Freesbie 1.1 livecd pciconf output. Anybody can help me, please? Thank you in advance. -- Manuel Trujillo Albarral Responsable de Sistemas VLEX NETWORKS S.L. http://www.vlex.com Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE-p2 #5: Thu Dec 2 19:22:53 CET 2004 root_at_athlon.casadamico.net:/usr/obj/usr/src/sys/FREESBIE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.60-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1072209920 (1022 MB) avail memory = 1010360320 (963 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL WS 380 > on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 11 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <multimedia> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 11 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 10 at device 28.5 on pci0 pci4: <ACPI PCI bus> on pcib4 bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 0xe7ef0000-0xe7efffff irq 10 at device 0.0 on pci4 miibus0: <MII bus> on bge0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:12:3f:76:2f:a7 uhci0: <UHCI (generic) USB controller> port 0xff80-0xff9f irq 9 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xff60-0xff7f irq 5 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xff40-0xff5f irq 3 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci3: <UHCI (generic) USB controller> port 0xff20-0xff3f irq 10 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <GENERIC ATA controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 31.2 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) speaker0: <PC speaker> port 0x61 on acpi0 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xc0000-0xcefff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2992596570 Hz quality 800 Timecounters tick every 1.000 msec ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to accept, logging unlimited md0: Preloaded image </boot/mfsroot> 31457280 bytes at 0xc098068a ad0: 238418MB <Maxtor 7L250S0/BANC1G10> [484406/16/63] at ata0-master UDMA33 acd0: DVDR <HL-DT-ST DVD+/-RW GWA4164B/D108> at ata1-master UDMA33 cd0 at ata1 bus 0 target 0 lun 0 cd0: <HL-DT-ST DVD+-RW GWA4164B D108> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: cd present [305170 x 2048 byte records] Mounting root from ufs:/dev/md0 md1.uzip: 12854 x 65536 blocks md2.uzip: 7798 x 65536 blocks md3.uzip: 277 x 65536 blocks md4.uzip: 2809 x 65536 blocks ext2fs: ad0s6: wrong magic number 0xffff (expected 0xef53) ext2fs: ad0s7: wrong magic number 0xffff (expected 0xef53) ext2fs: ad0s8: wrong magic number 0xffff (expected 0xef53) Linux version 2.6.11 (root_at_Knoppix) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #2 SMP Thu May 26 20:53:11 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fe8ac00 (usable) BIOS-e820: 000000003fe8ac00 - 000000003fe8cc00 (ACPI NVS) BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI data) BIOS-e820: 000000003fe8ec00 - 0000000040000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 126MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 On node 0 totalpages: 261770 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32394 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v002 DELL ) _at_ 0x000feb00 ACPI: XSDT (v001 DELL WS 380 0x00000006 ASL 0x00000061) _at_ 0x000fd25f ACPI: FADT (v003 DELL WS 380 0x00000006 ASL 0x00000061) _at_ 0x000fd357 ACPI: SSDT (v001 DELL st_ex 0x00001000 INTL 0x20050211) _at_ 0xfffcef90 ACPI: MADT (v001 DELL WS 380 0x00000006 ASL 0x00000061) _at_ 0x000fd44b ACPI: BOOT (v001 DELL WS 380 0x00000006 ASL 0x00000061) _at_ 0x000fd4bd ACPI: ASF! (v016 DELL WS 380 0x00000006 ASL 0x00000061) _at_ 0x000fd4e5 ACPI: MCFG (v001 DELL WS 380 0x00000006 ASL 0x00000061) _at_ 0x000fd54c ACPI: HPET (v001 DELL WS 380 0x00000006 ASL 0x00000061) _at_ 0x000fd58a ACPI: DSDT (v001 DELL dt_ex 0x00001000 INTL 0x20050211) _at_ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000) Built 1 zonelists Kernel command line: ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux lang=es __iounmap: bad address c00fffd9 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032128k/1047080k available (1847k kernel code, 14320k reserved, 946k data, 292k init, 129576k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Using HPET for base-timer Using HPET for gettimeofday Detected 2993.058 MHz processor. Using hpet for high-res timesource Calibrating delay loop... 5931.00 BogoMIPS (lpj=2965504) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000641d 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 per-CPU timeslice cutoff: 2924.86 usecs. task migration cache decay timeout: 3 msecs. Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay loop... 5980.16 BogoMIPS (lpj=2990080) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000641d 00000000 00000000 CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 Total of 2 processors activated (11911.16 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 878k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfbc6f, last bus=5 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas_at_hp.com ** so I can fix the driver. pnp: 00:00: ioport range 0x800-0x85f could not be reserved pnp: 00:00: ioport range 0xc00-0xc7f has been reserved pnp: 00:00: ioport range 0x860-0x8ff has been reserved Simple Boot Flag at 0x7a set to 0x1 audit: initializing netlink socket (disabled) audit(1131445645.867:0): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] Allocate Port Service[pcie03] vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 3072k, total 131072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:d5d0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe Probing IDE interface ide1... hdc: HL-DT-ST DVD+/-RW GWA4164B, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 libata version 1.10 loaded. ata_piix version 1.03 ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20 ata: 0x170 IDE port busy PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e01 87:4663 88:207f ata1: dev 0 ATA, max UDMA/133, 488281250 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix Vendor: ATA Model: Maxtor 7L250S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) SCSI device sda: drive cache: write back SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: PS/2 Generic Mouse on isa0060/serio1 EISA: Probing bus 0 at eisa0 EISA: Detected 0 cards. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 64Kbytes TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 15 Starting balanced_irq ACPI wakeup devices: VBTN PCI0 PCI4 PCI2 PCI3 PCI1 PCI5 PCI6 KBD USB0 USB1 USB2 USB3 ACPI: (supports S0 S1 S3 S4 S5) RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). seagate: ST0x/TMC-8xx not detected. Failed initialization of WD-7000 SCSI card! usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:1d.7: PCI device 8086:27cc (Intel Corp.) PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 21, pci mem 0xffa80800 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.0: PCI device 8086:27c8 (Intel Corp.) PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 21, io base 0xff80 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: PCI device 8086:27c9 (Intel Corp.) PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 22, io base 0xff60 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: PCI device 8086:27ca (Intel Corp.) PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 18, io base 0xff40 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.3: PCI device 8086:27cb (Intel Corp.) PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: irq 23, io base 0xff20 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ub: sizeof ub_scsi_cmd 64 ub_dev 2504 usb 4-2: new low speed USB device using uhci_hcd and address 2 usbcore: registered new driver ub Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. ieee1394: Initialized config rom entry `ip1394' sbp2: $Rev: 1219 $ Ben Collins <bcollins_at_debian.org> ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1) ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A cloop: Initializing cloop v2.02 cloop: loaded (max 8 devices) cloop: /cdrom/KNOPPIX/KNOPPIX: 82049 blocks, 65536 bytes/block, largest block is 65562 bytes. ISO 9660 Extensions: RRIP_1991A cloop: losetup_file: 65244 blocks, 65536 bytes/block, largest block is 65562 bytes. ISO 9660 Extensions: RRIP_1991A Registering unionfs version $Id: main.c,v 1.85 2005/03/14 22:19:49 dquigley Exp $ Freeing unused kernel memory: 292k freed Generic RTC Driver v1.07 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [VBTN] Linux Kernel Card Services options: [pci] [cardbus] [pm] usbcore: registered new driver hiddev input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver ts: Compaq touchscreen protocol output Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A hw_random hardware driver 1.0.0 loaded tg3.c:v3.23 (February 15, 2005) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:04:00.0 to 64 eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:12:3f:76:2f:a7 eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sda6 Ending clean XFS mount for filesystem: sda6 XFS mounting filesystem sda7 Ending clean XFS mount for filesystem: sda7 XFS mounting filesystem sda8 Ending clean XFS mount for filesystem: sda8 XFS mounting filesystem sda9 Ending clean XFS mount for filesystem: sda9 Adding 1116476k swap on /dev/sda10. Priority:-1 extents:1 NET: Registered protocol family 17 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. Linux agpgart interface v0.100 (c) Dave Jones apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. 0000:00:00.0 Host bridge: Intel Corp.: Unknown device 2774 Subsystem: Dell: Unknown device 01a8 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: [e0] #09 [2109] 0000:00:01.0 PCI bridge: Intel Corp.: Unknown device 2775 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 0x10 (64 bytes) Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: e8000000-efefffff Prefetchable memory behind bridge: 00000000d8000000-00000000dff00000 BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [a0] #10 [0141] 0000:00:1b.0 0403: Intel Corp.: Unknown device 27d8 (rev 01) Subsystem: Dell: Unknown device 01a8 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at efffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] #10 [0091] 0000:00:1c.0 PCI bridge: Intel Corp.: Unknown device 27d0 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 0x10 (64 bytes) Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e7f00000-e7ffffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:1c.4 PCI bridge: Intel Corp.: Unknown device 27e0 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 0x10 (64 bytes) Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:1c.5 PCI bridge: Intel Corp.: Unknown device 27e2 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 0x10 (64 bytes) Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: e7e00000-e7efffff BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:1d.0 USB Controller: Intel Corp.: Unknown device 27c8 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01a8 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at ff80 [size=32] 0000:00:1d.1 USB Controller: Intel Corp.: Unknown device 27c9 (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01a8 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 4: I/O ports at ff60 [size=32] 0000:00:1d.2 USB Controller: Intel Corp.: Unknown device 27ca (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01a8 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ff40 [size=32] 0000:00:1d.3 USB Controller: Intel Corp.: Unknown device 27cb (rev 01) (prog-if 00 [UHCI]) Subsystem: Dell: Unknown device 01a8 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 4: I/O ports at ff20 [size=32] 0000:00:1d.7 USB Controller: Intel Corp.: Unknown device 27cc (rev 01) (prog-if 20 [EHCI]) Subsystem: Dell: Unknown device 01a8 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] #0a [20a0] 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] #0d [0000] 0000:00:1f.0 ISA bridge: Intel Corp.: Unknown device 27b8 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [e0] #09 [100c] 0000:00:1f.2 IDE interface: Intel Corp.: Unknown device 27c0 (rev 01) (prog-if 80 [Master]) Subsystem: Dell: Unknown device 01a8 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 20 Region 0: I/O ports at <ignored> Region 1: I/O ports at <ignored> Region 2: I/O ports at <ignored> Region 3: I/O ports at <ignored> Region 4: I/O ports at ffa0 [size=16] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:00:1f.3 SMBus: Intel Corp.: Unknown device 27da (rev 01) Subsystem: Dell: Unknown device 01a8 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at ece0 [size=32] 0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 014e (rev a2) (prog-if 00 [VGA]) Subsystem: nVidia Corporation: Unknown device 02d1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M] Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at ee000000 (64-bit, non-prefetchable) [size=16M] Expansion ROM at efe00000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] #10 [0001] 0000:04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01) Subsystem: Dell: Unknown device 01a8 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 0x10 (64 bytes) Interrupt: pin A routed to IRQ 17 Region 0: Memory at e7ef0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable- Address: 3800140080020080 Data: 2108 Capabilities: [d0] #10 [0001] hostb0_at_pci0:0:0: class=0x060000 card=0x01a81028 chip=0x27748086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI pcib1_at_pci0:1:0: class=0x060400 card=0x00000088 chip=0x27758086 rev=0x00 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI none0_at_pci0:27:0: class=0x040300 card=0x01a81028 chip=0x27d88086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = multimedia pcib2_at_pci0:28:0: class=0x060400 card=0x00000040 chip=0x27d08086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib3_at_pci0:28:4: class=0x060400 card=0x00000040 chip=0x27e08086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib4_at_pci0:28:5: class=0x060400 card=0x00000040 chip=0x27e28086 rev=0x01 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI uhci0_at_pci0:29:0: class=0x0c0300 card=0x01a81028 chip=0x27c88086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB uhci1_at_pci0:29:1: class=0x0c0300 card=0x01a81028 chip=0x27c98086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB uhci2_at_pci0:29:2: class=0x0c0300 card=0x01a81028 chip=0x27ca8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB uhci3_at_pci0:29:3: class=0x0c0300 card=0x01a81028 chip=0x27cb8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB none1_at_pci0:29:7: class=0x0c0320 card=0x01a81028 chip=0x27cc8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB pcib5_at_pci0:30:0: class=0x060401 card=0x00000050 chip=0x244e8086 rev=0xe1 hdr=0x01 vendor = 'Intel Corporation' device = '82801BA/CA/DB/DBL/EB/ER (ICH2/3/4/4-L/5/5R), 6300ESB Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0_at_pci0:31:0: class=0x060100 card=0x00000000 chip=0x27b88086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = PCI-ISA atapci0_at_pci0:31:2: class=0x010180 card=0x01a81028 chip=0x27c08086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = mass storage subclass = ATA none2_at_pci0:31:3: class=0x0c0500 card=0x01a81028 chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = SMBus none3_at_pci1:0:0: class=0x030000 card=0x02d110de chip=0x014e10de rev=0xa2 hdr=0x00 vendor = 'NVIDIA Corporation' class = display subclass = VGA bge0_at_pci4:0:0: class=0x020000 card=0x01a81028 chip=0x167714e4 rev=0x01 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5751 NetXtreme Gigabit Ethernet PCI Express' class = network subclass = ethernetReceived on Thu Nov 10 2005 - 10:11:24 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:47 UTC