M. Warner Losh skrev: >In message: <434E538F.80000_at_psam.se> > Psadi <freebsd_at_psam.se> writes: >: I had decided to try FreeBSD 6.0 on my laptop. After I installed it >: beta4 I recived alot of xl0: watchdog timeout every time I try to use >: the internet. > >Interrupts aren't being routed correctly. You need to fix that. >There's a tiny chance it is in your hardware setup, but since prior >versions work, I'd guess this is the case. You'll need to save the >dmesg from 6.0 and from 5.4 and compare the too. Sadly, the Tecra >8000 moniker was used by a lot of different laptops. Mine just works >w/o any issues. > >: At startup I see that I get CARDBUS1: Resource not specified in CIS: >: id=14, size=80 > >Ignore these. Generally they are just noise. > >: I added in pccard.conf that it should use IRQ 3,5,10,15 though when I >: look it still uses 11 > >pccard.conf is completely ignored. > >: What else can I try or do to get more info for those that needs it? > >Put the laptop in my hands, and I'll fix it :-). Otherwise, we'll >have to start with boot -v dmesgs from working and broken systems. > >Warner > > > > I have taken a dmesg -v from both a fresh installed 5.4 and 6.0RC1 I will attach them instead of posting them If there is more info needed let me know. If I try and install through ftp from the CD with FreeBSD 6.0RC1 I also get the xl0:watchdog timeout. I do not recive them at all in 5.4 Peter Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RC1 #0: Sun Oct 9 20:32:57 UTC 2005 root_at_x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a88000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a881a8. Calibrating clock(s) ... i8254 clock: 1193154 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 299942800 Hz CPU: Pentium II/Pentium II Xeon/Celeron (299.94-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (127 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x0000000007d77fff, 118829056 bytes (29011 pages) avail memory = 121733120 (116 MB) bios32: Found BIOS32 Service Directory header at 0xc00fbe90 bios32: Entry = 0xfc4c0 (c00fc4c0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x1987 pnpbios: Found PnP BIOS data at 0xc00fed00 pnpbios: Entry = f0000:92c6 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID 7933f351 Other BIOS signatures found: wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750> on motherboard acpi0: [MPSAFE] acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 ACPI timer: 0/8 0/6 0/6 0/4 0/6 0/5 0/6 0/6 0/6 0/5 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0 cpu0: <ACPI CPU> on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcibios: BIOS version 2.10 Found $PIR table, 6 entries at 0xc00f1320 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 11 A 0x60 11 embedded 0 11 B 0x61 11 embedded 0 9 A 0x62 11 embedded 0 4 A 0x62 11 embedded 0 4 B 0x63 11 embedded 0 13 A 0x63 11 embedded 0 5 D 0x63 11 slot 1 0 6 A 0x62 11 slot 1 0 6 B 0x63 11 slot 1 0 6 C 0x60 11 slot 1 0 6 D 0x61 11 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x7192, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0xa200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base e0000000, size 28, enabled found-> vendor=0x10c8, dev=0x0005, revid=0x20 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base df000000, size 24, enabled map[14]: type 1, range 32, base ff800000, size 22, enabled map[18]: type 1, range 32, base ff700000, size 20, enabled pcib0: matched entry for 0.4.INTA (src \\_SB_.LNKC:0) pcib0: slot 4 INTA routed to irq 11 via \\_SB_.LNKC found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=5, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=5, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fe60, size 4, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=5, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type 4, range 32, base 0000ffe0, size 5, enabled pcib0: matched entry for 0.5.INTD (src \\_SB_.LNKD:0) pcib0: slot 5 INTD routed to irq 11 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=5, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type 4, range 32, base 0000fe70, size 4, enabled found-> vendor=0x1179, dev=0x0701, revid=0x23 bus=0, slot=9, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 4, range 32, base 0000ff80, size 5, enabled pcib0: matched entry for 0.9.INTA (src \\_SB_.LNKC:0) pcib0: slot 9 INTA routed to irq 11 via \\_SB_.LNKC found-> vendor=0x1179, dev=0x060a, revid=0x07 bus=0, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base 00000000, size 12, memory disabled pcib0: matched entry for 0.11.INTA (src \\_SB_.LNKA:0) pcib0: slot 11 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x1179, dev=0x060a, revid=0x07 bus=0, slot=11, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cach Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 root_at_harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (299.94-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (127 MB) avail memory = 117444608 (112 MB) npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0 cpu0: <ACPI CPU (2 Cx states)> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <display, VGA> at device 4.0 (no driver attached) isab0: <PCI-ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xfe60-0xfe6f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 5.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at device 5.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 5.3 (no driver attached) pci0: <simple comms> at device 9.0 (no driver attached) cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci0: <multimedia> at device 13.0 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x778-0x77a,0x378-0x37a irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROMs> at iomem 0xe8000-0xebfff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 299942793 Hz quality 800 Timecounters tick every 10.000 msec md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09dde24 cardbus1: Resource not specified in CIS: id=14, size=80 cardbus1: Resource not specified in CIS: id=18, size=80 xl0: <3Com 3c575C Fast Etherlink XL> port 0x1000-0x107f mem 0x88000000-0x8800007f,0x88000080-0x880000ff irq 11 at device 0.0 on cardbus1 miibus0: <MII bus> on xl0 tdkphy0: <TDK 78Q2120 media interface> on miibus0 tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:00:86:51:81:f8 ad0: 19077MB <IC25N020ATCS04-0/CA2OA71A> [38760/16/63] at ata0-master UDMA33 acd0: DVDROM <TOSHIBA DVD-ROM SD-C2102/1329> at ata1-master PIO4 Mounting root from ufs:/dev/md0 Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...6 4 1 1 1 0 0 done No buffers busy after final sync Uptime: 17m57s Shutting down ACPI Rebooting... Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005 root_at_harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a36000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a36278. Calibrating clock(s) ... i8254 clock: 1193140 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 299942368 Hz CPU: Pentium II/Pentium II Xeon/Celeron (299.94-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (127 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x0000000007d7ffff, 118861824 bytes (29019 pages) avail memory = 121626624 (115 MB) bios32: Found BIOS32 Service Directory header at 0xc00fbe90 bios32: Entry = 0xfc4c0 (c00fc4c0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x1987 pnpbios: Found PnP BIOS data at 0xc00fed00 pnpbios: Entry = f0000:92c6 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID 7933f351 Other BIOS signatures found: wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750> on motherboard acpi0: [MPSAFE] acpi0: Power Button (fixed) ACPI timer: 0/16777214 0/6 0/16777214 0/16777186 0/6 0/6 0/6 0/7 0/16777211 0/4 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0 cpu0: <ACPI CPU (2 Cx states)> on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcibios: BIOS version 2.10 Found $PIR table, 6 entries at 0xc00f1320 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 11 A 0x60 11 embedded 0 11 B 0x61 11 embedded 0 9 A 0x62 11 embedded 0 4 A 0x62 11 embedded 0 4 B 0x63 11 embedded 0 13 A 0x63 11 embedded 0 5 D 0x63 11 slot 1 0 6 A 0x62 11 slot 1 0 6 B 0x63 11 slot 1 0 6 C 0x60 11 slot 1 0 6 D 0x61 11 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.LNKA irq 0: [ 3 4 5 6 7 10 11 12] 11+ low,level,sharable 0.11.0 \\_SB_.LNKB irq 0: [ 3 4 5 6 7 10 11 12] 11+ low,level,sharable 0.11.1 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 10 11 12] 11+ low,level,sharable 0.9.0 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 10 11 12] 11+ low,level,sharable 0.4.0 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 10 11 12] 11+ low,level,sharable 0.4.1 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 10 11 12] 11+ low,level,sharable 0.13.0 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 10 11 12] 11+ low,level,sharable 0.5.3 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 10 11 12] 11+ low,level,sharable 0.6.0 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 10 11 12] 11+ low,level,sharable 0.6.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 28, enabled found-> vendor=0x8086, dev=0x7192, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0xa200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base df000000, size 24, enabled map[14]: type 1, range 32, base ff800000, size 22, enabled map[18]: type 1, range 32, base ff700000, size 20, enabled pcib0: matched entry for 0.4.INTA (src \\_SB_.LNKC) pcib0: possible interrupts: 3 4 5 6 7 10 11 12 ACPI PCI link arbitrated settings: \\_SB_.LNKD (references 4, priority 12885): interrupts: 11 10 5 12 7 6 4 3 penalty: 90 90 140 5090 5090 5090 5090 5090 \\_SB_.LNKC (references 3, priority 9663): interrupts: 11 10 5 12 7 6 4 3 penalty: 90 90 140 5090 5090 5090 5090 5090 \\_SB_.LNKA (references 1, priority 3221): interrupts: 11 10 5 12 7 6 4 3 penalty: 90 90 140 5090 5090 5090 5090 5090 \\_SB_.LNKB (references 1, priority 3221): interrupts: 11 10 5 12 7 6 4 3 penalty: 90 90 140 5090 5090 5090 5090 5090 pcib0: slot 4 INTA routed to irq 11 via \\_SB_.LNKC found-> vendor=0x10c8, dev=0x0005, revid=0x20 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=5, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fe60, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=5, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ffe0, size 5, enabled pcib0: matched entry for 0.5.INTD (src \\_SB_.LNKD) pcib0: possible interrupts: 3 4 5 6 7 10 11 12 ACPI PCI link arbitrated settings: \\_SB_.LNKD (references 4, priority 13260): interrupts: 10 11 5 12 7 6 4 3 penalty: 180 210 230 5180 5180 5180 5180 5180 \\_SB_.LNKA (references 1, priority 3315): interrupts: 10 11 5 12 7 6 4 3 penalty: 180 210 230 5180 5180 5180 5180 5180 \\_SB_.LNKB (references 1, priority 3315): interrupts: 10 11 5 12 7 6 4 3 penalty: 180 210 230 5180 5180 5180 5180 5180 pcib0: slot 5 INTD routed to irq 11 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=5, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 0000fe70, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=5, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000ff80, size 5, enabled pcib0: matched entry for 0.9.INTA (src \\_SB_.LNKC) pcib0: slot 9 INTA is already routed to irq 11 found-> vendor=0x1179, dev=0x0701, revid=0x23 bus=0, slot=9, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base 00000000, size 12, memory disabled pcib0: matched entry for 0.11.INTA (src \\_SB_.LNKA) pcib0: possible interrupts: 3 4 5 6 7 10 11 12 ACPI PCI link arbitrated settings: \\_SB_.LNKA (references 1, priority 3410): interrupts: 10 5 11 12 7 6 4 3 penalty: 270 320 340 5270 5270 5270 5270 5270 \\_SB_.LNKB (references 1, priority 3410): interrupts: 10 5 11 12 7 6 4 3 penalty: 270 320 340 5270 5270 5270 5270 5270 pcib0: slot 11 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x1179, dev=0x060a, revid=0x07 bus=0, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base 00000000, size 12, memory disabled pcib0: matched entry for 0.11.INTB (src \\_SB_.LNKB) pcib0: possible interrupts: 3 4 5 6 7 10 11 12 ACPI PCI link arbitrated settings: \\_SB_.LNKB (references 1, priority 3501): interrupts: 10 5 11 12 7 6 4 3 penalty: 360 410 440 5360 5360 5360 5360 5360 pcib0: slot 11 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x1179, dev=0x060a, revid=0x07 bus=0, slot=11, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 0000ee00, size 8, enabled pcib0: matched entry for 0.13.INTA (src \\_SB_.LNKD) pcib0: slot 13 INTA is already routed to irq 11 found-> vendor=0x123f, dev=0x8888, revid=0x02 bus=0, slot=13, func=0 class=04-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=11 powerspec 1 supports D0 D3 current D0 pci0: <display, VGA> at device 4.0 (no driver attached) PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: <PCI-ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xfe60-0xfe6f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 5.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfe60 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at device 5.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xffe0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 5.3 (no driver attached) pci0: <simple comms> at device 9.0 (no driver attached) cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x060a1179 0x04800007 0x06070007 0x00820000 0x10: 0x80000000 0x04800000 0x00141400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860010f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.1 on pci0 cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x060a1179 0x04800007 0x06070007 0x00820000 0x10: 0x80001000 0x04800000 0x00151500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860020f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pci0: <multimedia> at device 13.0 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 80 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x1 0x11 0x11 0x11 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0: <ECP parallel printer port> port 0x778-0x77a,0x378-0x37a irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed fe unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xe8000-0xebfff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 299942368 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached acpi_cmbat0: battery initialization start acpi_cmbat1: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times cardbus1: Resource not specified in CIS: id=14, size=80 cardbus1: Resource not specified in CIS: id=18, size=80 found-> vendor=0x10b7, dev=0x5257, revid=0x10 bus=21, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 xl0: <3Com 3c575C Fast Etherlink XL> port 0x1000-0x107f mem 0x88000000-0x8800007f,0x88000080-0x880000ff irq 11 at device 0.0 on cardbus1 xl0: using port I/O xl0: media options word: 40 xl0: found MII/AUTO miibus0: <MII bus> on xl0 tdkphy0: <TDK 78Q2120 media interface> on miibus0 tdkphy0: OUI 0x00c039, model 0x0014, rev. 11 tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:00:86:51:81:f8 xl0: [MPSAFE] ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel PIIX4 chip ata0-master: setting UDMA33 on Intel PIIX4 chip ad0: <IC25N020ATCS04-0/CA2OA71A> ATA-5 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 ar: FreeBSD check1 failed ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: setting PIO4 on Intel PIIX4 chip acd0: <TOSHIBA DVD-ROM SD-C2102/1329> DVDROM drive at ata1 as master acd0: read 3445KB/s (3445KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc GEOM: new disk ad0 [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/4/63 s:63 l:20482812 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:20482875 l:18587205 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 10487199744 end 10487231999 GEOM: Configure ad0s2, start 10487232000 length 9516648960 end 20003880959 [0] f:72 typ:13 s(CHS):256/97/36 e(CHS):370/10/20 s:543908729 l:1819440195 [1] f:2b typ:43 s(CHS):372/65/44 e(CHS):364/68/37 s:1922328096 l:1953784096 [2] f:20 typ:114 s(CHS):353/115/52 e(CHS):288/116/33 s:168652143 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:-1669136384 l:49835 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 242032640 end 510468095 GEOM: Configure ad0s2c, start 0 length 9516648960 end 9516648959 GEOM: Configure ad0s2d, start 510468096 length 268435456 end 778903551 GEOM: Configure ad0s2e, start 778903552 length 268435456 end 1047339007 GEOM: Configure ad0s2f, start 1047339008 length 8469309952 end 9516648959 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init acpi_cmbat0: battery initialization failed, giving up acpi_cmbat1: battery initialization failed, giving upReceived on Fri Oct 14 2005 - 21:27:05 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:45 UTC