M. Warner Losh skrev: >Please try this patch. I think we've had a minor regression in our >PCI BIOS routed interrupts. Also, please try w/o ACPI enabled to see >if that changes things. With acpi enabled, I'm not sure this patch >will do anything for you. If it does with acpi disabled, it gives a >real strong clue what to look for in the acpi code. We used to always >route the interrupt, even when the bios said it had one, now it looks >like we do that less agressively. > >Warner > >Index: pci_pir.c >=================================================================== >RCS file: /home/ncvs/src/sys/i386/pci/pci_pir.c,v >retrieving revision 1.119 >diff -u -r1.119 pci_pir.c >--- pci_pir.c 8 Sep 2005 17:07:12 -0000 1.119 >+++ pci_pir.c 15 Oct 2005 18:51:07 -0000 >_at__at_ -348,6 +348,9 _at__at_ > irq, entry->pe_bus, entry->pe_device, pin + 'A', > pci_link->pl_id); > pci_link->pl_irq = irq; >+ if (!pci_link->pl_routed) >+ pci_pir_biosroute(entry->pe_bus, entry->pe_device, 0, >+ pin - 1, pci_link->pl_irq); > pci_link->pl_routed = 1; > return; > } > > > > Since this is my first time trying to do this, to make sure I did it right. I copied the above into a file that I named pci_pir.patch then I run the command patch < pci_pir.patch. From viewing the source code and the result from the patch program it was succesful. However I still got the xl0: watchdog timeout. I disable the ACPI by adding hint.acpi.0.disabled="1" to /boot/device.hints I tried the command acpiconf -h and got /dev/acpi no such file or directory So I hope it was disable correctly. This also fail to help me and I still get the watchdog timeout. I attach the boot -v dmesg What do wish me to do next :) Peter Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RC1 #0: Sun Oct 9 20:32:57 UTC 2005 root_at_x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a31000. Calibrating clock(s) ... i8254 clock: 1193154 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 299943430 Hz CPU: Pentium II/Pentium II Xeon/Celeron (299.94-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (127 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x0000000007d77fff, 118829056 bytes (29011 pages) avail memory = 121749504 (116 MB) bios32: Found BIOS32 Service Directory header at 0xc00fbe90 bios32: Entry = 0xfc4c0 (c00fc4c0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x1987 pnpbios: Found PnP BIOS data at 0xc00fed00 pnpbios: Entry = f0000:92c6 Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID 7933f351 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> mem: <memory> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086) pcibios: BIOS version 2.10 Found $PIR table, 6 entries at 0xc00f1320 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 11 A 0x60 11 embedded 0 11 B 0x61 11 embedded 0 9 A 0x62 11 embedded 0 4 A 0x62 11 embedded 0 4 B 0x63 11 embedded 0 13 A 0x63 11 embedded 0 5 D 0x63 11 slot 1 0 6 A 0x62 11 slot 1 0 6 B 0x63 11 slot 1 0 6 C 0x60 11 slot 1 0 6 D 0x61 11 pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard $PIR: Links after initial probe: Link IRQ Rtd Ref IRQs 0x60 255 N 2 11 0x61 255 N 2 11 0x62 255 N 3 11 0x63 255 N 4 11 $PIR: Found matching pin for 0.11.INTA at func 0: 11 $PIR: Found matching pin for 0.11.INTB at func 1: 11 $PIR: Found matching pin for 0.9.INTA at func 0: 11 $PIR: Found matching pin for 0.4.INTA at func 0: 11 $PIR: Found matching pin for 0.13.INTA at func 0: 11 $PIR: Found matching pin for 0.5.INTD at func 2: 11 $PIR: Links after initial IRQ discovery: Link IRQ Rtd Ref IRQs 0x60 11 N 2 11 0x61 11 N 2 11 0x62 11 N 3 11 0x63 11 N 4 11 $PIR: IRQs used by BIOS: 11 $PIR: Interrupt Weights: [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] [ 0 0 0 0 0 0 0 0 0 0 0 11 0 0 0 0 ] pci0: <PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x7192, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0xa200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base e0000000, size 28, enabled found-> vendor=0x10c8, dev=0x0005, revid=0x20 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base df000000, size 24, enabled map[14]: type 1, range 32, base ff800000, size 22, enabled map[18]: type 1, range 32, base ff700000, size 20, enabled $PIR: 0:4 INTA routed to irq 11 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=5, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=5, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fe60, size 4, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=5, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type 4, range 32, base 0000ffe0, size 5, enabled $PIR: 0:5 INTD routed to irq 11 found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=5, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type 4, range 32, base 0000fe70, size 4, enabled found-> vendor=0x1179, dev=0x0701, revid=0x23 bus=0, slot=9, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 4, range 32, base 0000ff80, size 5, enabled $PIR: 0:9 INTA routed to irq 11 found-> vendor=0x1179, dev=0x060a, revid=0x07 bus=0, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base 00000000, size 12, memory disabled $PIR: 0:11 INTA routed to irq 11 found-> vendor=0x1179, dev=0x060a, revid=0x07 bus=0, slot=11, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 1, range 32, base 00000000, size 12, memory disabled $PIR: 0:11 INTB routed to irq 11 found-> vendor=0x123f, dev=0x8888, revid=0x02 bus=0, slot=13, func=0 class=04-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=11 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000ee00, size 8, enabled $PIR: 0:13 INTA routed to irq 11 pci0: <display, VGA> at device 4.0 (no driver attached) PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: <PCI-ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfe60-0xfe6f at device 5.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfe60 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x04 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 11 at device 5.2 on pci0 uhci0: Lazy allocation of 0x20 bytes rid 0x20 type 4 at 0x1000 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 5.3 (no driver attached) pci0: <simple comms> at device 9.0 (no driver attached) cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x060a1179 0x04800007 0x06070007 0x00820000 0x10: 0x80000000 0x04800000 0x00141400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860010f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.1 on pci0 cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x060a1179 0x04800007 0x06070007 0x00820000 0x10: 0x80001000 0x04800000 0x00151500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860020f0 0x00000002 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x000003f1 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pci0: <multimedia> at device 13.0 (no driver attached) ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete pnpbios: 15 devices, largest 501 bytes PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xe8000-0xebfff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0x7feffff, size=0x7ef0000 PNP0c01: adding fixed memory32 range 0x7ff0000-0x7ffffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100a0000-0x100fffff, size=0x60000 PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1 PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1 PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1 PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 5 device ID PNP0800 (0008d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 6 device ID PNP0c04 (040cd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 7 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 8 device ID PNP0f13 (130fd041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 9 device ID PNP0b00 (000bd041) PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1 PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1 PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1 PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1 PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1 PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1 PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1 PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1 PNP0c02: adding io range 0x6d-0x6d, size=0x1, align=0x1 PNP0c02: adding io range 0x6f-0x6f, size=0x1, align=0x1 PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1 PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x22-0x22, size=0x1, align=0x1 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1 PNP0c02: adding io range 0xfeac-0xfeac, size=0x1, align=0x1 PNP0c02: adding io range 0xfe00-0xfe3f, size=0x40, align=0x1 PNP0c02: adding io range 0xfe50-0xfe57, size=0x8, align=0x1 PNP0c02: adding io range 0xfe70-0xfe7f, size=0x10, align=0x1 PNP0c02: adding io range 0xfe90-0xfe97, size=0x8, align=0x1 PNP0c02: adding io range 0xfe9e-0xfe9e, size=0x1, align=0x1 PNP0c02: adding irq mask 0x200 pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 11 device ID PNP0700 (0007d041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 PNP0501: adding irq mask 0x10 pnpbios: handle 14 device ID PNP0501 (0105d041) PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1 PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1 PNP0401: adding irq mask 0x80 PNP0401: adding dma mask 0x8 pnpbios: handle 16 device ID PNP0401 (0104d041) pnpbios: handle 17 device ID PNP0a03 (030ad041) YMH0021: adding io range 0x220-0x233, size=0x14, align=0x1 YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1 YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x1 YMH0021: adding io range 0x330-0x333, size=0x4, align=0x1 YMH0021: adding io range 0x538-0x539, size=0x2, align=0x1 YMH0021: adding irq mask 0x20 YMH0021: adding dma mask 0x2 YMH0021: adding dma mask 0x1 pnpbios: handle 21 device ID YMH0021 (2100a865) unknown: status reg test failed fe unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xe8000-0xebfff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ic_type 80 part_id 80 fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: ic_type 80 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x11 0x11 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0c01> at iomem 0-0x9ffff,0xe8000-0xebfff on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0f13> at irq 12 on isa0 unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0c02> at port 0x80,0x84-0x86,0x88,0x8c-0x8e,0xe0-0xef,0xb0-0xb2,0x2e-0x2f,0x62,0x66,0x6d,0x6f,0x480-0x48f,0xcf8-0xcff,0x4d0-0x4d1,0x22,0x92,0xfeac,0xfe00-0xfe3f,0xfe50-0xfe57,0xfe70-0xfe7f on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0401> at port 0x378-0x37a on isa0 unknown: <YMH0021> failed to probe at port 0x220-0x233,0x530-0x537,0x388-0x38f,0x330-0x333,0x538-0x539 irq 5 drq 1,0 on isa0 umass0: USB Flash Disk, rev 2.00/2.00, addr 2 umass0:0:0:-1: Attached to scbus0 Device configuration finished. procfs registered Timecounter "TSC" frequency 299943430 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached cardbus1: Resource not specified in CIS: id=14, size=80 cardbus1: Resource not specified in CIS: id=18, size=80 found-> vendor=0x10b7, dev=0x5257, revid=0x10 bus=21, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 xl0: <3Com 3c575C Fast Etherlink XL> port 0x1080-0x10ff mem 0x88000000-0x8800007f,0x88000080-0x880000ff irq 11 at device 0.0 on cardbus1 xl0: using port I/O xl0: media options word: 40 xl0: found MII/AUTO miibus0: <MII bus> on xl0 tdkphy0: <TDK 78Q2120 media interface> on miibus0 tdkphy0: OUI 0x00c039, model 0x0014, rev. 11 tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:00:86:51:81:f8 xl0: [MPSAFE] ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on Intel PIIX4 chip ad0: setting UDMA33 on Intel PIIX4 chip ad0: 19077MB <IC25N020ATCS04 0 CA2OA71A> at ata0-master UDMA33 ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire acd0: setting PIO4 on Intel PIIX4 chip acd0: <TOSHIBA DVD-ROM SD-C2102/1329> DVDROM drive at ata1 as master acd0: read 3445KB/s (3445KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <OTi Flash Disk 2.00> Removable Direct Access SCSI-2 device pass0: Serial Number \^_ pass0: 1.000MB/s transfers ATA PseudoRAID loaded da0 at umass-sim0 bus 0 target 0 lun 0 da0: <OTi Flash Disk 2.00> Removable Direct Access SCSI-2 device da0: Serial Number \^_ da0: 1.000MB/s transfers da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C) GEOM: new disk ad0 GEOM: new disk da0 Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init xl0: watchdog timeout xl0: watchdog timeout xl0: watchdog timeout xl0: watchdog timeout xl0: watchdog timeout xl0: watchdog timeout xl0: watchdog timeout xl0: watchdog timeout xl0: watchdog timeoutReceived on Sun Oct 16 2005 - 21:55:01 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:45 UTC