Re: Installation error Intel mobile ICH6M SATA controller.

From: Armin Gruner <ag-usenet_at_muc.de>
Date: 4 Sep 2005 11:31:05 GMT
Hi,
we are happily running FreeBSD 5.4/5-STABLE on a D915GEV intel board..

atapci1: <Intel ICH6 SATA150 controller> 
    port 0xd800-0xd80f,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807
    irq 19 at device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
ad4: 381554MB <ST3400832AS/3.03> [775221/16/63] at ata2-master SATA150
ad5: 238475MB <WDC WD2500SD-01KCB0> [484521/16/63] at ata2-slave SATA150

atapci1_at_pci0:31:2:
    class=0x01018f card=0x45568086 chip=0x26518086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FW ICH6/ICH6W SATA Controller'
    class    = mass storage
    subclass = ATA

As this is a backup server, it slurps up to 400GB each night
(with 500 MBit/s peak) via an em0 1000baseTX
(the on-board Marvell chip is unfortunately not recognized yet).

Regards, Armin

In article <20050904043646.68612.qmail_at_web33515.mail.mud.yahoo.com>,
Dean Patterson wrote:

>Do you have the Intel 915GM chipset and the ICH6M SATA controller?  
>
>--- Eric Anderson <anderson_at_centtech.com> wrote:
>
>> Dean Patterson wrote:
>> > Well I checked it using the shell and it was
>> marked as
>> > active.  But the problem is that the ATA driver
>> only
>> > supports up to ICH5, per the man pages.  So how is
>> > that situation handled?  I assume that I am NEVER
>> > going to run FBSD on this laptop?
>> 
>> For what it's worth, I ran 5.4, 6.0, and 7.0 on a
>> D610 with no problems.
>> 

-- 
Armin Gruner                   ____                          mailto:ag_at_muc.de
``Nur wer sich aendert, bleibt \  /                    http://www.muc.de/~ag/
sich treu'' - Wolf Biermann     \/ PGP Key: 0x72DBE671 or finger -l ag_at_muc.de
Received on Sun Sep 04 2005 - 09:32:56 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:42 UTC