D-Link ath card not recognized

From: Patrick Bowen <pbowen_at_fastmail.fm>
Date: Sun, 23 Jul 2006 17:57:30 -0500
Just upgraded from 6.1 RELEASE to -current, and a previously working 
D-Link DWL-G630 AirPlus G wireless notebook adapter no longer works.

H/W ver.: C2    F/W ver.: 3.01

This from dmesg;

cbb alloc res fail
cbb alloc res fail
cardbus0: <network, ethernet> at device 0.0 (no driver attached)

and this from dumpcis on Linux;

Socket 0:
  manfid 0x0271, 0x0012
  config_cb base 0x0000 last_index 0x01
  cftable_entry_cb 0x01 [default]
    [master] [parity] [serr] [fast back]
    Vcc Vnom 3300mV Istatic 25mA Iavg 450mA Ipeak 500mA
    irq mask 0xffff [level]
    mem_base 1
  BAR 1 size 64kb [mem]
  vers_1 7.1, "Atheros Communications, Inc.", "AR5001-0000-0000",
    "Wireless LAN Reference Card", "00"
  funcid network_adapter [post]
  lan_speed 6 mb/sec
  lan_speed 9 mb/sec
  lan_speed 12 mb/sec
  lan_speed 18 mb/sec
  lan_speed 24 mb/sec
  lan_speed 36 mb/sec
  lan_speed 48 mb/sec
  lan_speed 54 mb/sec
  lan_speed 72 mb/sec
  lan_media 5.4_GHz
  lan_node_id 00 03 2f 55 55 55
  lan_connector Closed connector standard

Ialso snagged this from Linux's dmesg;

[17179589.744000] pccard: CardBus card inserted into slot 0
[17179589.776000] ath_hal: module license 'Proprietary' taints kernel.
[17179589.776000] ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, 
RF5112, RF2
413)
[17179589.796000] cs: IO port probe 0x100-0x3af: clean.
[17179589.800000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[17179589.800000] cs: IO port probe 0x820-0x8ff: clean.
[17179589.800000] cs: IO port probe 0xc00-0xcf7: clean.
[17179589.800000] cs: IO port probe 0xa00-0xaff: clean.
[17179589.824000] wlan: 0.8.6.0 (EXPERIMENTAL)
[17179589.824000] ath_rate_sample: 1.2
[17179589.832000] ath_pci: 0.9.6.0 (EXPERIMENTAL)
[17179589.832000] PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
[17179589.832000] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, 
low) ->
IRQ 177
[17179590.416000] Build date: Jul 10 2006
[17179590.416000] Debugging version (IEEE80211)
[17179590.416000] ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[17179590.416000] ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 
9Mbps 12Mbps
 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[17179590.416000] ath0: H/W encryption support: WEP AES AES_CCM TKIP
[17179590.416000] ath0: mac 7.8 phy 4.5 radio 5.6
[17179590.416000] ath0: Use hw queue 1 for WME_AC_BE traffic
[17179590.416000] ath0: Use hw queue 0 for WME_AC_BK traffic
[17179590.416000] ath0: Use hw queue 2 for WME_AC_VI traffic
[17179590.416000] ath0: Use hw queue 3 for WME_AC_VO traffic
[17179590.416000] ath0: Use hw queue 8 for CAB traffic
[17179590.416000] ath0: Use hw queue 9 for beacons
[17179590.416000] Debugging version (ATH)
[17179590.416000] ath0: Atheros 5212: mem=0x24000000, irq=177

If I can provide any more info, please let me know.

Thanks,
Patrick
Received on Sun Jul 23 2006 - 20:57:39 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:58 UTC