At 05:46 PM 10/27/2006, Søren Schmidt wrote: >Mike Tancsa wrote: >>Has anyone got this motherboard to work with >>FreeBSD ? I tried fiddling with the BIOS but >>no matter what, 6.2Beta does not see the ad0 >>(PATA drive) nor ad4 (SATA drive)... It never >>sees the drive, although it does see the controller as a generic IDE controller >> >>The intel product code is BOXDG965SSCK >> >>Does this motherboard work in 7.x ? >Dont know that exact board,but the Gigabyte >965P- DS3 I've got here with the same chipset works fine. >The SATA ports on the ICH8 are fully supported and should work on any board. >However the ICH8 has *no* PATA port, so the PATA >port on mine is a JMicron chip which we support >including its extra 2 SATA ports. >Some Intel boards use Marvell chips that should >work as generic but early reports seems to indicate that is not the case. Hmmmm, I think the dmesg implied Intel parts for the various controllers but I didnt have it on serial console. However, I just got the board at the end of the day and didt have time to fiddle too much. I will try and update the BIOS on Monday and try a few settings to see if I can get it booting. ---MikeReceived on Fri Oct 27 2006 - 21:40:24 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:01 UTC