At 04:46 PM 10/27/2006, Søren Schmidt wrote: >Mike Tancsa wrote: >>Has anyone got this motherboard to work with >>FreeBSD ? I tried fiddling with the BIOS but >>no matter what, 6.2Beta does not see the ad0 >>(PATA drive) nor ad4 (SATA drive)... It never >>sees the drive, although it does see the controller as a generic IDE controller >> >>The intel product code is BOXDG965SSCK >> >>Does this motherboard work in 7.x ? >Dont know that exact board,but the Gigabyte >965P- DS3 I've got here with the same chipset works fine. >The SATA ports on the ICH8 are fully supported and should work on any board. >However the ICH8 has *no* PATA port, so the PATA >port on mine is a JMicron chip which we support >including its extra 2 SATA ports. >Some Intel boards use Marvell chips that should >work as generic but early reports seems to indicate that is not the case. I worked around it by installing to a SATA disk on another box and booting from it. Looks like you are right about the Marvell chip. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-PRERELEASE #0: Fri Oct 27 18:03:52 EDT 2006 mdtancsa_at_r6-32bit.sentex.ca:/usr/obj/usr/src/sys/db Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 CPU 6400 _at_ 2.13GHz (2144.00-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2120511488 (2022 MB) avail memory = 2069848064 (1973 MB) ACPI APIC Table: <INTEL DG965SS > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <INTEL DG965SS> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <display, VGA> at device 2.0 (no driver attached) pci0: <simple comms> at device 3.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection Version - 6.1.4> port 0x30c0-0x30df mem 0x90300000-0x9031ffff,0x90324000-0x90324fff irq 20 at device 25.0 on pci0 em0: Ethernet address: 00:16:76:da:e4:0f em0: [FAST] uhci0: <UHCI (generic) USB controller> port 0x30a0-0x30bf irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x3080-0x309f irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0x90325400-0x903257ff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pci0: <multimedia> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 atapci0: <GENERIC ATA controller> port 0x2018-0x201f,0x2024-0x2027,0x2010-0x2017,0x2020-0x2023,0x2000-0x200f mem 0x90100000-0x901001ff irq 17 at device 0.0 on pci2 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci5: <ACPI PCI bus> on pcib5 uhci2: <UHCI (generic) USB controller> port 0x3060-0x307f irq 23 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci2 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x3040-0x305f irq 19 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0x3020-0x303f irq 18 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0x90325000-0x903253ff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: <EHCI (generic) USB 2.0 controller> on ehci1 usb6: USB revision 2.0 uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub6: 6 ports with 6 removable, self powered pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib6 rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x90004800-0x900048ff irq 21 at device 0.0 on pci6 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:50:fc:34:57:cb pci6: <serial bus, FireWire> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH8 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3110-0x311f,0x3100-0x310f irq 19 at device 31.2 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH8 SATA300 controller> port 0x3128-0x312f,0x314c-0x314f,0x3120-0x3127,0x3148-0x314b,0x30f0-0x30ff,0x30e0-0x30ef irq 19 at device 31.5 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f0 irq 6 drq 2 on acpi0 fdc0: [FAST] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad0: 152627MB <Seagate ST3160812AS 3.AAD> at ata0-master SATA150 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s1a em0: link state changed to UP em0: link state changed to DOWN em0: link state changed to UP em0: link state changed to DOWN em0: link state changed to UP [r6-32bit]# atacontrol info ata0 Master: ad0 <ST3160812AS/3.AAD> Serial ATA II Slave: no device present [r6-32bit]# pciconf -lv hostb0_at_pci0:0:0: class=0x060000 card=0x514d8086 chip=0x29a08086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI none0_at_pci0:2:0: class=0x030000 card=0x514d8086 chip=0x29a28086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = display subclass = VGA none1_at_pci0:3:0: class=0x078000 card=0x514d8086 chip=0x29a48086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = simple comms em0_at_pci0:25:0: class=0x020000 card=0x00018086 chip=0x104b8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = network subclass = ethernet uhci0_at_pci0:26:0: class=0x0c0300 card=0x514d8086 chip=0x28348086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB uhci1_at_pci0:26:1: class=0x0c0300 card=0x514d8086 chip=0x28358086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB ehci0_at_pci0:26:7: class=0x0c0320 card=0x514d8086 chip=0x283a8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB none2_at_pci0:27:0: class=0x040300 card=0x21148086 chip=0x284b8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = multimedia pcib1_at_pci0:28:0: class=0x060400 card=0x00000040 chip=0x283f8086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib2_at_pci0:28:1: class=0x060400 card=0x00000040 chip=0x28418086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib3_at_pci0:28:2: class=0x060400 card=0x00000040 chip=0x28438086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib4_at_pci0:28:3: class=0x060400 card=0x00000040 chip=0x28458086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib5_at_pci0:28:4: class=0x060400 card=0x00000040 chip=0x28478086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI uhci2_at_pci0:29:0: class=0x0c0300 card=0x514d8086 chip=0x28308086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB uhci3_at_pci0:29:1: class=0x0c0300 card=0x514d8086 chip=0x28318086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB uhci4_at_pci0:29:2: class=0x0c0300 card=0x514d8086 chip=0x28328086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB ehci1_at_pci0:29:7: class=0x0c0320 card=0x514d8086 chip=0x28368086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB pcib6_at_pci0:30:0: class=0x060401 card=0x00000050 chip=0x244e8086 rev=0xf2 hdr=0x01 vendor = 'Intel Corporation' device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0_at_pci0:31:0: class=0x060100 card=0x514d8086 chip=0x28108086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = PCI-ISA atapci1_at_pci0:31:2: class=0x01018a card=0x514d8086 chip=0x28208086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = mass storage subclass = ATA none3_at_pci0:31:3: class=0x0c0500 card=0x514d8086 chip=0x283e8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = SMBus atapci2_at_pci0:31:5: class=0x010185 card=0x514d8086 chip=0x28258086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = mass storage subclass = ATA atapci0_at_pci2:0:0: class=0x01018f card=0x610111ab chip=0x610111ab rev=0xb1 hdr=0x00 vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' class = mass storage subclass = ATA rl0_at_pci6:0:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter' class = network subclass = ethernet none4_at_pci6:3:0: class=0x0c0010 card=0x514d8086 chip=0x8023104c rev=0x00 hdr=0x00 vendor = 'Texas Instruments (TI)' device = 'TSB43AB22/A IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr' class = serial bus subclass = FireWire [r6-32bit]#Received on Tue Oct 31 2006 - 15:31:03 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:02 UTC