Yep, using GELI the providers is much better. I decided to go one step further and run GLABEL on my drives so my ZFS pool will be immune from device enumeration issues (assuming I move the drives between systems, SATA raid cards, etc.) The only thing that sucks is that once I have attached all GELI providers, I have to manually kickstart zfs and mount the pool with the following commands:- # kldload zfs # zfs volinit # zfs mount -a pool: z state: ONLINE scrub: resilver completed with 0 errors on Wed Aug 29 12:23:52 2007 config: NAME STATE READ WRITE CKSUM z ONLINE 0 0 0 raidz1 ONLINE 0 0 0 label/0.eli ONLINE 0 0 0 label/1.eli ONLINE 0 0 0 label/2.eli ONLINE 0 0 0 label/3.eli ONLINE 0 0 0 errors: No known data errors One thing I also tried was replacing a drive with a much larger one using zpool replace. ZFS didn't notice the larger disk capacity of the new drive and subsequently didn't increase the pool size. What is the logic behind that?Received on Wed Aug 29 2007 - 02:03:15 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:16 UTC