韓家標 Bill Hacker wrote: > sam wrote: >> On Mon, 05 Nov 2007 21:24:37 +0100, 韓家標 Bill Hacker >> <askbill_at_conducive.net> wrote: >> >> >>> On either a GA G33-DS3R or Asus P5K, there has been no difficulty >>> with what it sees as a "CD-948E/TKU/T4B" on acd0. >> Is this an IDE or SATA drive? >> >> >> sam >> > > IDE & ancient. > > Grant - SATA has to be better sorted than it is now, but the > suggestion to try (an)other CD/DVD drive(s) holds, as much for pinning > down the fault as fixing it. > > Dfferent place must be looked at if it faults with PATA as well as > SATA, or only with one not the other. > > JFWIW, I've also run 2.5" and 3.5" PATA HDD and 2.5: and 3.5" SATA HDD > with 3 different makes of PATA-SATA PCB adaptors on that same IDE > channel here. > > Only hassle when I had both the HDD and CD jumpered as 'master' or a > WD HDD not jumpered as master-with-slave-present. > > Ergo I still think it is specific to your hardware, ELSE it would be a > far more commonly reported issue already. Note that MOST such posts > have had to do with HDD or arrays of same, not nearly as many about CD > / DVD. It *HAS* been reported by at least 3 different sources and 3 different hw vendors... only commonality is IHC9 on P35 chipsets. -- Aryeh M. Friedman Developer, not business, friendly http://www.flosoft-systems.comReceived on Tue Nov 06 2007 - 01:18:15 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:21 UTC