Hi When I run aaccli on 7-PRERELEASE, I get the following error: Adaptec SCSI RAID Controller Command Line Interface Copyright 1998-2002 Adaptec, Inc. All rights reserved -------------------------------------------------------------------------------- CLI > open aac0 Executing: open "aac0" Command Error: <The miniport device driver is too old to work with the current A FAAPI.DLL.> The device (2410SA) is detected as follows: hw.aac.iosize_max: 65536 dev.aac.0.%desc: Adaptec SATA RAID 2410SA dev.aac.0.%driver: aac dev.aac.0.%location: slot=1 function=0 dev.aac.0.%pnpinfo: vendor=0x9005 device=0x0285 subvendor=0x9005 subdevice=0x0290 class=0x010400 dev.aac.0.%parent: pci6 dev.aacd.0.%desc: RAID 1 (Mirror) dev.aacd.0.%driver: aacd dev.aacd.0.%parent: aac0 The system is amd64 SMP. The last kernel I have that works is 7-CURRENT(i386) circa July last year. Does anyone know whether amd64 is the issue, or whether the aac driver has just dropped support for aaccli or if there is a newer aaccli available from Adaptec? Or, has Adaptec just dropped FreeBSD support? Ian -- Ian FreislichReceived on Tue Feb 12 2008 - 07:54:10 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:27 UTC