Hi list, I can't seem to do anything with FreeBSD 8 BETA3. Whenever I try to do anything from a syscons terminal (ttyv#) the system freezes and requires a hard reboot. The longest run I got was last night for about 10 hours while doing a portupgrade (X is not an option until then) before it froze. Today, I saw it panic for the first time. It stopped at kbd_enter and kbd_why, but I didn't have savecore turned on to provide more detail. I've also seen it freeze in what appeared to be due to mouse movement and syscons savers but I can't verify this because the system does not panic, it freezes hard. I'll try to reproduce this but it almost always freezes rather than panic. I had another laptop do this to me in earlier -CURRENT revisions and disregarded it as possible failing hardware. But both laptops ran FreeBSD 7 and very early -CURRENT without these instabilities. I've attached uname, dmesg, my kernel config and rc.conf for any clues. I will try my best to reproduce the panic and post my findings. Nate FreeBSD 8.0-BETA3 FreeBSD 8.0-BETA3 #0: Tue Aug 25 20:45:06 EDT 2009 root_at_LIGHTBULB.LOCAL:/usr/obj/usr/src/sys/LIGHTBULB i386 # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.519.2.2 2009/08/13 17:54:11 attilio Exp $ #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident LIGHTBULB # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. # Use the following to compile in values accessible to the kernel # through getenv() (or kenv(1) in userland). The format of the file # is 'variable=value', see kenv(1) # # env "GENERIC.env" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options GEOM_JOURNAL # Provides journaling options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty) options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options P1003_1B_SEMAPHORES # POSIX-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options KBD_INSTALL_CDEV # install a CDEV entry in /dev options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options AUDIT # Security event auditing options MAC # TrustedBSD MAC Framework options FLOWTABLE # per-cpu routing cache #options KDTRACE_HOOKS # Kernel DTrace hooks # Debugging for use in -current options KDB # Enable kernel debugger support. options DDB # Support DDB. options GDB # Support remote GDB. options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options ALTQ options ALTQ_CBQ options ALTQ_RED options ALTQ_RIO options ALTQ_HFSC options ALTQ_CDNR options ALTQ_PRIQ device pf device pflog device pfsync device if_bridge # To make an SMP kernel, the next two lines are needed #options SMP # Symmetric MultiProcessor Kernel #device apic # I/O APIC # CPU frequency control device cpufreq # Bus support. device acpi device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI peripherals device scbus # SCSI bus (required for SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD device pass # Passthrough device (direct SCSI access) #device ses # SCSI Environmental Services (and SAF-TE) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device uart # Generic UART driver # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to sio, uart and/or ppc drivers): #device puc # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 Gigabit Ethernet Family #device igb # Intel PRO/1000 PCIE Server Gigabit Family #device ixgb # Intel PRO/10GbE Ethernet Card #device le # AMD Am7900 LANCE and Am79C9xx PCnet #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device ae # Attansic/Atheros L2 FastEthernet #device age # Attansic/Atheros L1 Gigabit Ethernet #device alc # Atheros AR8131/AR8132 Ethernet #device ale # Atheros AR8121/AR8113/AR8114 Ethernet #device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet #device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes #device et # Agere ET1310 10/100/Gigabit Ethernet #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet #device lge # Level 1 LXT1001 gigabit Ethernet #device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet #device nfe # nVidia nForce MCP on-board Ethernet #device nge # NatSemi DP83820 gigabit Ethernet #device nve # nVidia nForce MCP on-board Ethernet Networking #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') #device re # RealTek 8139C+/8169/8169S/8110S #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device stge # Sundance/Tamarack TC9021 gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit Ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # Wireless NIC cards device wlan # 802.11 support options IEEE80211_DEBUG # enable debug msgs options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's options IEEE80211_SUPPORT_MESH # enable 802.11s D3.0 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm #device an # Aironet 4500/4800 802.11 wireless NICs. device ath # Atheros pci/cardbus NIC's device ath_hal # pci/cardbus chip support options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors device ath_rate_sample # SampleRate tx rate control for ath device ral # Ralink Technology RT2500 wireless NICs. #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device tun # Packet tunnel. device pty # BSD-style compatibility pseudo ttys device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device rum # Ralink Technology RT2501USB wireless NICs device ural # Ralink Technology RT2500USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device zyd # ZyDAS zb1211/zb1211b wireless NICs #device urio # Diamond Rio 500 MP3 player # USB Serial devices device ucom # Generic com ttys #device u3g # USB-based 3G modems (Option, Huawei, Sierra) #device uark # Technologies ARK3116 based serial adapters #device ubsa # Belkin F5U103 and compatible serial adapters #device uftdi # For FTDI usb serial adapters #device uipaq # Some WinCE based devices device uplcom # Prolific PL-2303 serial adapters #device uslcom # SI Labs CP2101/CP2102 serial adapters #device uvisor # Visor and Palm devices #device uvscom # USB serial support for DDI pocket's PHS # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) #device fwip # IP over FireWire (RFC 2734,3146) #device dcons # Dumb console driver #device dcons_crom # Configuration ROM for dcons # -- sysinstall generated deltas -- # Mon Feb 18 17:25:32 2008 # Created: Mon Feb 18 17:25:32 2008 # Enable network daemons for user convenience. # Please make all changes to this file, not to /etc/defaults/rc.conf. # This file now contains just the overrides from /etc/defaults/rc.conf. hostname="LIGHTBULB.LOCAL" moused_enable="NO" moused_flags="-3" saver="NO" sshd_enable="YES" powerd_enable="NO" powerd_flags="-n adaptive -a adaptive -b adaptive" cupsd_enable="NO" cloned_interfaces="bridge0" ifconfig_bridge0="inet 172.20.0.1 netmask 0xffff0000 up" #ifconfig_iwi0="WPA DHCP" noip_enable="NO" dbus_enable="NO" hald_enable="NO" ipv6_enable="NO" nfs_client_enable="YES" nfs_client_flags="-n 4" #nfs_server_enable="YES" rpc_lockd_enable="YES" rpc_statd_enable="YES" pf_enable="YES" pf_rules="/etc/pf.conf" pf_flags="" pflog_enable="YES" pflog_logfile="/var/log/pflog" pflog_flags="" gateway_enable="YES" named_enable="NO" dhcpd_enable="NO" # -- sysinstall generated deltas -- # Sun Mar 9 21:29:39 2008 ntpdate_flags="us.pool.ntp.org" ntpdate_enable="YES" nfs_server_flags="-u -t -n 4" mountd_flags="-r" Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-BETA3 #0: Tue Aug 25 20:45:06 EDT 2009 root_at_LIGHTBULB.LOCAL:/usr/obj/usr/src/sys/LIGHTBULB WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1.86GHz (1862.13-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0x180<EST,TM2> AMD Features=0x100000<NX> real memory = 1610612736 (1536 MB) avail memory = 1563512832 (1491 MB) kbd1 at kbdmux0 ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-625 ACPI Warning: Optional field Gpe1Block has zero address or length: 0 102C/0 20090521 tbfadt-655 acpi0: <IBM TP-1Y> on motherboard acpi0: [ITHREAD] acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 5ff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 11 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xc0000000-0xc7ffffff,0xb0100000-0xb010ffff irq 11 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4101> mem 0xb0200000-0xb020ffff irq 11 at device 0.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:15:58:09:1b:e7 bge0: [ITHREAD] pcib3: <ACPI PCI-PCI bridge> irq 11 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 uhci0: [ITHREAD] usbus0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 uhci1: [ITHREAD] usbus1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: [ITHREAD] usbus2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 11 at device 29.3 on pci0 uhci3: [ITHREAD] usbus3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0000000-0xb00003ff irq 11 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib4 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb4000000-0xb4000fff irq 11 at device 0.0 on pci11 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [FILTER] pci11: <network> at device 2.0 (no driver attached) pci0: <multimedia, audio> at device 30.2 (no driver attached) pci0: <simple comms, generic modem> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18c0-0x18cf at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] ppc0: <Parallel port> port 0x278-0x27f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd1800-0xd27ff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1862134244 Hz quality 800 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ad0: 57231MB <HTS541060G9AT00 MB3IA60A> at ata0-master UDMA100 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4242N/0201> at ata1-master UDMA33 WARNING: WITNESS option enabled, expect reduced performance. GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s). GEOM_JOURNAL: Journal 273940673: ad0s1e contains data. GEOM_JOURNAL: Journal 273940673: ad0s1e contains journal. GEOM_JOURNAL: Journal ad0s1e consistent. uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Root mount waiting for: usbus4 Trying to mount root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted ugen2.2: <STMicroelectronics> at usbus2 ugen4.2: <SanDisk> at usbus4 umass0: <ms ifac 1 (SCSI::BULK_ONLY)> on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <SanDisk Sansa Clip 4GB v02.> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 3751MB (7683072 512 byte sectors: 255H 63S/T 478C)Received on Wed Aug 26 2009 - 16:49:14 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:39:54 UTC